Kingston KVR32S22S8/16 16GB DDR4 PC-3200 Laptop Memory Module

FEATURES
This document describes ValueRAM’s KVR32S22S8/16 is a 2G x
64-bit (16GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM),
1Rx8, non-ECC, memory module, based on eight 2G x 8-bit FBGA
components. The SPD is programmed to JEDEC standard latency
DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin DIMM uses
gold contact fingers. The electrical and mechanical specifications
are as follows:
CL(IDD)
Row Cycle Time (tRCmin)
Refresh to Active/Refresh
Command Time (tRFCmin)
Row Active Time (tRASmin)
UL Rating
Operating Temperature
Storage Temperature
22 cycles
45.75ns(min.)
350ns(min.)
32ns(min.)
94 V – 0
0o
C to +85o
C
-55o
C to +100o
C
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.18” (30.00mm)
• RoHS Compliant and Halogen-Free